SUMMIT MANUFACTURING CO -- YORK OIL C -- 9150-00N033536
===================== Product Identification =====================
Product ID:YORK OIL C
MSDS Date:06/09/1986
FSC:9150
NIIN:00N033536
=== Responsible Party ===
Company Name:SUMMIT MANUFACTURING CO
Address:7649 CANTON CENTER DR
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Info Phone Num:301-282-3880
Emergency Phone Num:301-282-3880
CAGE:SUMMI
=== Contractor Identification ===
Company Name:SUMMIT MANUFACTURING CO
Address:7649 CANTON CENTER DR
Box:City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:301-282-3880
CAGE:SUMMI
============= Composition/Information on Ingredients =============
Ingred Name:MIXTURE, PETROLEUM HYDORCARBONS
Fraction by Wt: 100%
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED SKIN CONTACT MAY PRODUCE
MINOR SKIN IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:MINOR SKIN IRRITATION.
Medical Cond Aggravated by Exposure:NONE KNOWN.
======================= First Aid Measures =======================
First Aid:SKIN:FLUSH WITH LARGE AMOUNTS OF WATER, IF REDNESS OR
IRRITATION PERSISTS CALL MD. EYE:FLUSH WITH POTABLE WATER FOR A
MINIMUM OF 15 MINUTES. CALL MD . INHAL:MOVE TO FRESH AIR. SUPPORT
BREATHING (GIVE O*2/ARTF RESP) . INGEST:CALL MD IMMEDIATELY .
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:>300F,>149C
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM, WATER FOG,
SAND/EARTH.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
================== Accidental Release Measures ==================
Spill Release Procedures:CONTAIN SPILL, ABSORB WITH OIL ABOSRBANT
MATERIAL. DISPOSE OF AS SOLID WASTE OR IN ACCORDANCE WITH LOCAL,
STATE OR FEDERAL REGULATIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:WEAR OIL RESISTANT GLOVES, BOOTS AND
CLOTHING.
Other Precautions:NONE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE NORMALLY REQUIRED. NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE NORMALLY REQUIRED.
Protective Gloves:OIL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:OIL RESISTANT GLOVES, BOOTS.
Work Hygienic Practices:WASH WITH SOAP & WATER. REPLACE CONTAMINATD
CLOTHING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:>500F,>260C
Vapor Pres:<0.001
Vapor Density:>10
Spec Gravity:0.88-0.91
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER VISCOUS LIQUID
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS SUCH AS CHROMIC ACID AND HYDROGEN PEROXIDE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO*2, WATER.
==================== Disposal Considerations ====================
Waste Disposal Methods:LIQUID WASTE:RECLAIM AS USED OIL THROUGH NORMAL
WASTE OIL RECLAMATION CHANNELS. DISPOSAL MUST BE IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.